“We already manage all our product information in the PLM. Why would we need a PIM as well?”
It’s a very common question, especially in manufacturing companies.
PLM and PIM deal with the same product, and they may even hold some of the same information.
But they don’t look at it from the same angle.
Put simply: the PLM helps you design, develop and govern the product throughout its lifecycle. The PIM helps you organize, enrich and distribute the information needed to present, sell and support that product across markets and channels.
That distinction, though, doesn’t mean there’s a hard line between “technical data” and “commercial data”.
The more useful question is a different one:
Where does each piece of information originate, who owns it, and where does it need to be used?
What is a PLM?
PLM stands for Product Lifecycle Management.
It’s a system built to manage the product through design, development, industrialization and the changes it goes through over time.
In a manufacturing company, it’s typically where you manage things like:
- Design specifications
- Materials and components
- Bills of materials
- Revisions
- Technical documentation
- CAD files
- Engineering changes
- Requirements
- Compliance information
- Product versions and states during development
So the PLM helps answer questions like:
- Which is the correct version of this component?
- Which revision has been approved?
- Which materials are part of this configuration?
- What changed compared to the previous version?
This information is essential for building and governing the product.
But it isn’t always enough to take the product to the channels where it will be presented and used.
What is a PIM?
PIM stands for Product Information Management.
Its job is to organize and distribute the product information that different people, markets and channels need to use.
It can manage, for example:
- Commercial product names
- Descriptions
- Publishable attributes
- Variants
- Classifications
- Translations
- Images
- Manuals
- Certifications
- Relationships and compatibility
- Market-specific content
- Information required by ecommerce sites, marketplaces or distributors
The PIM helps answer a different set of questions:
- Do we have everything we need to publish this product?
- Is the description ready in German?
- Which attributes does this distributor need to receive?
- Which image should be used on the marketplace?
- Is the product complete for the French market?
The product is the same. What changes is the context in which the data is used.
Read the guide: what a PIM is and when you really need oneSo the PLM holds technical data and the PIM commercial data?
It’s a handy simplification to start with, but it isn’t always accurate.
An attribute like material, power rating or dimensions can be entirely technical and originate in the PLM.
But that same value may also need to appear:
- On the product page of your website
- In a catalog
- In a distributor’s portal
- On a marketplace
- In a data sheet meant for the customer
In that case there’s no need to type the same information in twice.
The value can originate in the PLM, where its owners manage it, and flow into the PIM to be used alongside the other information needed for distribution.
So the point isn’t “this data is technical, so it belongs in the PLM” or “this data is commercial, so it belongs in the PIM”.
The point is knowing which system governs the official version of the data, and which other systems need to be able to use it.
A concrete example: an industrial product
Picture a manufacturer of industrial pumps.
In the PLM, during design
- Components
- Materials
- Bill of materials
- Revisions
- Design specifications
- CAD files
- Approved changes
What’s also needed to take it to market
- Product name
- Description
- Flow rate
- Maximum pressure
- Publishable dimensions
- Recommended applications
- Compatibility
- Certifications
- Manuals
- Images
- Translations
- Categories
- Data required by distributors
Some of this information can come straight from the PLM. The rest is added in the PIM by marketing, product management or other teams. The PIM brings it all together and gets it ready for each destination.
In practice, one possible flow looks like this:
PLM → PIM → ecommerce / website / distributors / marketplaces / catalogs
That doesn’t mean every company needs exactly this architecture. It means data can move from one system to the next without being recreated each time.
Where do PLM and PIM overlap?
Some overlap is perfectly normal. Both can hold:
- Technical attributes
- Documents
- Variant information
- Classifications
- Relationships between products
That isn’t necessarily a problem. The problem starts when it’s unclear which system is responsible for the correct information.
If a dimension is changed in the PLM but the PIM keeps the old value because someone has to update it by hand, you’ve created two sources that can drift apart.
That’s why, when PLM and PIM work together, one of the most important decisions is defining who owns which data.
For every piece of information, you need to be able to answer three questions:
- 01
Where does it originate?
- 02
Who keeps it up to date?
- 03
Where does it need to be distributed?
Why not just use the PLM for everything?
In some companies, that can work.
If you have few channels, simple commercial needs, and the information needed for publishing is already well managed in the PLM, you may not need a PIM at all.
The trouble starts when distribution gets more complex. For example:
- More languages
- More markets
- Ecommerce
- Marketplaces
- Many distributors
- Different requirements for each channel
- Marketing content
- Images and documentation
- Completeness checks
- Workflows between product and marketing
A PLM can be extremely sophisticated at managing the product lifecycle, but that doesn’t automatically make it the right tool for preparing and distributing thousands of product records to different destinations.
Not because it’s “missing data”. Because the problem to solve is a different one.
And why not just use the PIM instead of the PLM?
The reverse is also true. A PIM doesn’t necessarily replace a PLM.
If you need to manage engineering revisions, bills of materials, CAD files, design changes and product development processes, the PIM wasn’t built to take that system’s place.
The most useful approach isn’t to look for one piece of software that does everything. It’s to work out which tools you actually need and how to make them work together without duplicating effort.
PLM and PIM: a possible flow
Imagine the engineering team changes the material of a component.
- 01
The change is handled in the PLM
The new material is approved along with the product revision.
- 02
The updated value reaches the PIM
The PIM receives the new information without marketing having to re-enter it by hand.
- 03
The PIM checks where that information is used
The material may appear on the product page, in the technical specifications or in the data sent to distributors.
- 04
The channels receive the updated version
The value is distributed through the flows already in place.
This way the engineering team keeps working in the system it knows. Marketing and sales keep working in the PIM.
And nobody has to wonder which of two spreadsheets holds the right value.
See how openlane connects to your PLM, ERP and other business systemsWhen does it make sense to have both a PLM and a PIM?
The combination tends to pay off when both of these kinds of complexity are present:
Complexity in product design and lifecycle
Complexity in managing and distributing product information
It’s a common situation in manufacturing companies with:
- Many products or variants
- Detailed technical specifications
- Complex documentation
- Frequent revisions
- Multiple markets and languages
- Distributors
- Ecommerce or marketplaces
- Several departments involved
In these cases PLM and PIM aren’t competitors. They’re two tools that can take care of different moments and different needs of the same product.
So: PIM or PLM?
More often than not, the answer is that it isn’t an either/or choice.
The PLM can govern the product while it’s being designed, changed and industrialized.
The PIM can take the information it needs, enrich it and make it available in every context where the product has to be presented, sold or supported.
What matters is not ending up with two systems that ask people to maintain the same data by hand.
When roles and flows are clear, the principle is simple:
Information is managed where it makes sense for it to originate, and then made available wherever it’s needed.